1. NORIPHAN® HTR N 990/010 NC - non-conductive black for IMD/FIM technology
NORIPHAN® HTR N is an established, formable, backmouldable and solvent-based one-component screen printing ink for film insert moulding technology.
Due to the development of the new deep black colour shade NORIPHAN® HTR N 990/010 NC, a carbon-free, non-conductive black is available for printed electronic applications now.
The colour shade has a high optical density, an electrical resistance in the giga ohm range and is radar transmissible.
The colour shade can be used for decorative prints but is mainly used for plane multi-layer printing or backing of metallic and polymer conductive pastes. Carbon-based pigments, so called carbon blacks, normally used for black colour shades, are electrically conductive and can interfere with the functional structures. NORIPHAN® HTR N 990/010 NC meets the increased requirements regarding thermal resistance and the demanding hydrolysis test in the automotive industry.
The NORIPHAN® HTR N 990/010 NC color shade has been formulated and optimized regarding the interlayer adhesion and shows good adhesion in compound values in the final film/ink/injection material composition.
2. NORIPHAN® N2K screen printing ink for IMD/FIM technology
NORIPHAN® N2K is a well-established solvent-based two-component screen printing ink for IMD/FIM technology.
The glossy ink system is optimized for processing thin PC films (< 175 µm). Films decorated with NORIPHAN® N2K show no curling effect.
Nowadays this IMD/FIM ink system is used especially for printed electronics applications.
3. Norilux® DC
Norilux® DC is a formable, abrasion and chemically resistant Dual Cure screen printing lacquer. Norilux® DC can be used as protective lacquer or hard coat on PC, PMMA, ABS and PP films.
Norilux® DC is ideally suited for first surface coating/protection of products manufactured in IMD/FIM technology.
Available in glossy, matt and various satin gloss, textured and matt grades.
4. NoriCure® HC-1
NoriCure®HC-1 is an UV-curing screen printing lacquer showing excellent scratch and abrasion resistance. The cured surface of the lacquer resists even strong wipes with steel wool.
The high gloss UV-lacquer is designed for printing on PC films, coated PET films (e.g. Autotype Autoflex EPG 180, Autotex V200), and various rigid PVC films and for overprinting of printed products.
The lacquer is used to overprint and protect displays, lenses and panels. The cured lacquer shows excellent resistances to chemicals and cleaning agents. Besides the high gloss NoriCure HC-1, matt (NoriCure® HC-1-001) and textured (NoriCure® HC-1-002) as well as UV-stabilized (NoriCure® HC-1-003) versions are available.
Please visit Proell here.